Water
filtration
with
coconut shell carbon
Amico technical data
Replaces:
|
|
| Minimum operating temperature: | 0.6°C or 33°F |
| Maximum operating temperature: | 38°C or 100°F |
| Min. working pressure: | 140 kPA or 20psi |
| Max. working pressure: | 827 kPa or 120psi |
| Rated capacity: | 7570 l or 2000 gal |
| Flow rate: | 1.9 lpm or 0.5 gpm |
| EAN: | 5905133586146 |
Seltino AmicoSeltino in-line water filter for Samsung* and other refrigerators
The Seltino Amico external filter is designed to be mounted on the water hose.
Hose connection: quick-connect
Replace your old filter with a new one that contains no silver and but coconut-charcoal filtration instead.
Choose Seltino quality - the healthy choice for you and your loved ones.
Water is our most precious resource, demanding only the best water filters.
Seltino Amico is a filter designed to give users maximum satisfaction at a reasonable price.
Crystal clear water obtained by coconut charcoal filtration stays clean throughout: until it is formed into an ice cube or poured into a glass.
Choose Seltino quality. The healthy choice for you and your loved ones.
The filter can be used in any refrigerator regardless of the manufacturer but it must have a hose-mounted external filter.
The difference between Seltino Amico and Seltino SLG-2012 lies in the fact that the Amico is attached to the hose using a quick-connect connector (not a threaded connector and screw cap).
Caution
- Install on cold water line only
- Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
For optimal performance after replacing the water filter, you must:
- Dispense water through the dispenser for 5 minutes or 10 litres
- Press and hold the "filter reset" button, which is located on the panel above the dispenser.
*All trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only.